AUTOMATION
We have made quality our habit.
It’s not something that we just strive for – we live by this principle every day.
CONTROL PANELS
For an enterprise to be able to compete, most important elements must be reviewed and applied. First of all, minimizing energy consumption and workforce number is essential.
If any of these criteria are below world standards, profi tability and competition chance of the enterprise will be reduced.
Therefore, it is inevitable to apply PLC and PC-controlled electricity and automation systems to increase effiiciency.
In order to safely command and control the machinery used in the system, MaxSilo uses the MCC Boards and PLC-SCADA system.
While MCC Boards are used in simple grain storage systems, MaxSilo recommends PLC-SCADA systems in bigger and more complex systems.
While the MCC boards require the manual operation of the system, PLC-SCADA requires no expertise since it allows fully automated control.
MaxSilo prefers world-known and reliable high quality brands including Siemens, Schneider Electrics (Telemecanique), and Phoenix Contact in switching materials for the command systems of both the PLC-SCADA and MCC boards.
The PLC-SCADA command system supplied by MaxSilo allows for controlling and managing the entire system from a single point.
Thanks to the software custom-developed for grain storage systems, all potential errors of the operator are estimated in advance, making the system protected against human errors.
The operator is warned by the system to identify and remedy possible failures in running equipment and power boards with the exact position of the failure, allowing for immediate response.
The software shows the system’s actions so it becomes possible to respond to the system, The system is automatically interrupted and emergency stops are possible with Emergency buttons against potential dangers, which ensures maximized personnel safety.
Since the system is operated in a certain order and by certain time intervals in conveying all types of grains, any potential failures otherwise (grain clogging the system and resulting physical breaks and failures in system elements caused by overload) are prevented at the onset.
The ability to monitor and use the system, and detect failures over the internet saves time both on the customer and MaxSilo side in solving the problem.
The ability to control the command panel on 24V and the insulated structure of the command system and the power board prevents the system from damages in case of failure.
With PLC-SCADA, only the motors needed for the intended work shall be operated, preventing unnecessary motor operation and saving energy.
Since the switching materials used in the system are, as mentioned earlier, supplied by world brands allowing easy access to spares in any part of the world, potential failures in command systems can easily be remedied in a short time.
The command system is designed with industrial and highly resistant products, which eliminate potential damages to the system caused by external factors including harsh operational conditions, humidity, high temperature etc.
The operating principle of the plc system can be summarized as follows
- Measures the current of the main motor,
- Displays motor loading %,
- Synchronized operation,
- Provides easy integration to automation system,
- Notifi es the oiling time of the mechanical system,
- Monitors all malfunctions and warnings on the machine.
SOFTWARE
OUR SOME PROJECTS
Send Us a Massage
If you're interested in hearing more about the way we work, have a business proposal, or are interested in making a purchase, we'd love to hear from you.
